YZG/FZG vacuum dryer

◇ Product characteristic
● Under the vacuum material solution boiling point lowering, causes the evaporator the heat transfer propelling force to increase, therefore to is certain thermal output may save the evaporator the heat transfer area.
● Evaporates the operation heat source to be possible to use the low pressure steam or to give off heat the steam.
● Evaporator less loss of heat.
● Front is dry may carry on disinfection processing, in the drying in transit, having nothing impurity mixes in, conforms to the GMP requirement.
● Belongs to the static type vacuum drier, therefore the dry material physique cannot damage  
                                                     
◇ Application scope
     Is suitable to is easy under the high temperature to decompose, the polymerization and the deterioration the material low temperature is dry; Widely is used in profession and so on drugs manufacture, chemical industry, food, electron
◇ Principle of work
      The so-called vacuum is dry, is in the dry material under the vacuum condition, and carries on heats up dryly. If carries on pumping air using the vacuum pump to pull out wet, then sped up the drying velocity.
      Note: If uses the condenser, in the material solvent passable condenser has performed to recycle; If uses the SK series pendular water ring vacuum pump, but does not use the condenser, saves the energy investment.
◇ Technical parameter

Name	YZG-600	YZG-1000	YZG-1400	FZG-15
Outside box size	Φ600×976	Φ1000×1527	Φ1400×2054	1500×1400×1220
Outside box size	1153×810 ×1020	1693×1190 ×1500	2386×1657 ×1920	1513×1924 ×2060
Dries a layer	4	6	8	8
The level is away from	81	102	102	122
Dries the plate size	310×600×45	460×640×45	460×640×45	460×640×45
Dries the plate number	4	12	32	32
Dries in a tube to permit the pressure	≤0.784(8kg/cm2)	≤0.784	≤0.784	≤0.784
In box temperature	≤150	≤150	≤150	≤150
In box idling vacuum degree	-0.09～0.096
When does not use the condenser, vacuum pump model, power	SK-1.5  4kw	SK-3 5.5kw	Sk-6  11kw	SK-6  11kw
Drying oven weight	250	800	1000	2100

      The above data, only supplies the reference, if has the specialrequest, this factory provides the design, the advisory service